ETHYLENE BIS STEARAMIDE

Product Details:

This product is also called ethylene bis stearamide. This compound is hard and crisp white wax with high melting point, its industrial form is yellow slim granule, no side effect on humans, not dissolve to most solvent, stable to acid, alkali and water, dissolve to hot chlorinated hydrocarbon agent and aromatic hydrocarbon solvent, its powder form is smoothing, wettability is available for water with 80 or above.

TECHNICAL DATA 

1. APPEARANCE : WHITE POWDER 2. ORIGINAL MELTING POINT : 141 -146
3. GROSS ADMION VALUE : mg KOH g ≤3.0 4. FINENESS : 20/125/200/325 mesh
5. CHROMATICITY VALUE : ≤5.0 6. ACID VALUE : mg KOH/g ≤10.0
7. HEATING LOSS (%) : ≤0.5

APPLICATIONS

PLASTICS: It can be used as internal and external lubricant for many thermal plasticity & thermoset plastics, LIKE ABS, PS, AS and PVC, as well as PE, PP, PVAC, cellulose Acetate, Nylon, pheonolic-Resin and amino plastics with good luster and stripping performance. It can be used as internal parting agent in process of PUR injection mouldingof thermal plasticity, from 0.1% to 1%. Amount is 0.5% as lubricant of polyoxymethylene, then flow rate of solvent can be enhanced, stripping performance is improved, brightness of polyoxymethylene, thermal

RUBBER: Good viscidity-resistant and agglomeration-resistant effect can be gained if 1% to 3% EBS are added into emulsion of synthetic resin and rubber, such as Yiny1,polychloroprene,GRS(SBR)

CHEMICAL FIBRE: Can enhance heat resistance, weather resistance, fluidness and certain antistatic effect of polyester and polyamide fiber.

MOLD RELEASE: Mold release can be produced if phenol-formaldehyde resin for sand-casting is added with EBS

DISPERSANT OF PIGMENT AND STUFFING: Can be used as pigment dispersant of color batch of plastics and chemical fibers, such as ABS, PS, acrylic fiber and terylene. It can be used as diffusing powder for matching color of plastics 0.5% to 5% can be added in line with different amount of dye fillings.

POWDER COATING: Can be used as flow promotor of powder coating

DOPE AND PRINTING INK: Salt mist and dampproof effect can be enhanced by adding 0.5% to 2% in the manufacturing process of dope and oil paint; performance of paint remover can be improved,as well as levelling property of firing lacker surface if this product is added into dope. Can be used as dulling agent for polishing furniture and printing ink.

OTHER PURPOSES: Melting point-raise agent for petroleum product; lubricant and anticorrosive agent for drawbench of metal; embedding materials of electric component; anti-foam additive and coating component of paper for paper-making industry; anti-foam additive and constant water-drawing agent; viscidity of asphaltum can be lowered, softening point, water resistanceand weather resistance can be enhanced if added into the asphaltum

Additional Information:

• Item Code: EBS