New Items
Providing you the best range of zinc oxide-ip/bp/usp/ep/jp, calcium stearate ip/bp/usp/ep/jp, zinc stearate-ip/bp/usp/ep, sodium stearate-bp/usp/ep, magnesium stearate-ip/bp/usp/ep/jp and light kaolin i p b p with effective & timely delivery.Zinc Oxide-ip/bp/usp/ep/jp
Approx. Rs 195 / KgGet Latest Price
Product Details:| Brand | MLA Group of Industries |
| Purity | 99.85% |
| Form | Powder |
| Packaging Size | 25 Kg |
| Application | Pharmaceutical |
|
Test and Method |
Specification |
Result |
|
|
Identification Test A- (BP/EP/IP/JP/USP) |
It becomes yellow when strongly heated & yellow colour disappear on cooling. |
Complies |
|
|
Identification Test B- (BP/EP/IP/JP) |
Solution gives the reaction of zinc |
Complies |
|
|
Identification Test B- (USP) |
Dissolve in a slight excess of 3N Hydrochloric acid . |
Complies |
|
|
Alkalinity(BP/EP/IP/USP) |
NMT 0.3 ml of 0.1 M HCL requires to Change the colour of indicator Indicator |
Complies |
|
|
Alkali(JP) |
Add 2 drops of phenolphthalein TS and 0.20 mL of 0.1 mol/L hydrochloric acid VS: no color develops. |
Complies |
|
|
Arsenic(BP/EP/IP) |
NMT 5.0 ppm |
Complies |
|
|
Arsenic(USP) |
6.0 ppm Max |
Complies |
Calcium Stearate Ip/bp/usp/ep/jp
Approx. Rs 100 / KgGet Latest Price
Product Details:| Brand | MLA Group of Industries |
| Form | Powder |
| Packaging Size | 25 Kg |
| Application | Pharmaceutical |
|
Test and Method |
Specification |
|
Identification A (BP/EP/USP) |
Freezing Point-53°C Min |
|
Identification B(BP/EP) |
Acid Value between 195-210 |
|
Identification C(BP/EP) |
Examine the chromatogram obtained in the test for fatty acid composition |
|
Identification D(BP/EP) |
Solution gives reaction of Calcium 2.3.1 |
|
Identification A (JP) |
Shake vigorously 3g Stearate with 20 ml. of diluted hydrochloric acid (1 in 2) and 30 mL of diethyl ether for 3 minutes, and allow to stand: the separated aqueous layer responds to the Qualitative Tests (1), (2) and (4) for calcium salt. |
|
Identification B (JP) |
residue melts at a temperature not below 54*C |
|
Identification A (IP) |
The H2O layer gives the test for Calcium |
|
Identification B (IP/USP) |
Fatty acid obtained not congeal below 54 °C |
|
Acidity Or Alkalinity(BP/EP) |
NMT 0.5 ml of 0.01 M Hcl or 0.01 M Naoh Required For Change the colour |
|
Chloride(BP/EP) |
0.10% |
|
Sulphates(BP/EP) |
0.30% |
|
Cadmium(BP/EP) |
NMT 3 ppm |
|
Lead(BP/EP/IP/USP) |
NMT 10 ppm |
|
Lead(JP) |
NMT 20 ppm |
|
Nickel (BP/EP |
NMT 5 ppm |
|
Loss on Drying(BP/EP |
NMT 6.0 % Max. |
|
Loss on Drying(IP/JP) |
NMT 4.0 % Max. |
|
Microbial Contamination(BP/EP) |
TAMC-NMT 103 ,TYMC-NMT 102, Salmonella & Escherichia Coli-Absent |
|
Assay (IP) |
9 -10.5% |
|
Assay (BP/EP/USP) |
6.4 -7.4% |
|
Assay (JP) |
NLT 6.4% and NMT 7.1% of calcium |
|
Fatty Acid Composition (BP/EP/IP/USP) |
|
|
1. Stearic Acid |
For 1. NLT 40% |
|
2. Sum of Palmitic acid +Stearic Acid |
For 2. NLT 90% |
Zinc Stearate-ip/bp/usp/ep
Approx. Rs 125 / KgGet Latest Price
Product Details:| Packaging Size | 25 Kg |
| Form | Powder |
| Packaging Type | Bag |
| Brand | MLA Industries |
| Usage/Application | Pharma |
| Country of Origin | Made in India |
|
Test and Method |
Specification |
Result |
|
|
Identification Test A (BP/EP/IP) |
Freezing Point-NLT 53°C |
58 deg C |
|
|
Identification Test B(BP/EP/IP) |
soln. should gives reaction of Zinc. |
Complies |
|
|
Identification Test A (USP) |
portion of the water layer responds to the tests for Zinc (191) |
Complies |
|
|
Identification Test B(USP) |
Fatty acid obtained from Test A congeal at temp not below 54 deg C |
|
|
|
Acidity or Alkalinity (BP/EP/IP) |
NMT 0.3 ml of 0.1 M HCL is req. for the change the colour Of The Sol. |
Complies |
|
|
Acid Value of the fatty acid (BP/EP) |
195-210 |
202 |
|
|
Chloride (BP/EP/IP) |
Not More than 250 ppm |
Complies |
|
|
Sulfates (BP/EP/IP) |
Not More than 0.6 % |
Complies |
|
|
Cadmium (BP/EP) |
5 ppm max |
1.20 ppm |
|
|
Heavy Metal as Pb (BP/EP) |
NMT 25 ppm |
Complies |
|
|
Heavy Metal as Pb (IP) |
NMT 20 ppm |
Complies |
|
|
Purity (Assay) (BP/EP/IP) |
10.0 - 12.0 % on dried basis |
11.20% |
Sodium Stearate-bp/usp/ep
Approx. Rs 108 / KgGet Latest Price
Product Details:| Packaging Size | 25 Kg |
| Form | Powder |
| Packaging Type | Bag |
| Brand | MLA Industries |
| Country of Origin | Made in India |
|
Test and Method |
Specification |
Result |
|
|
Identification Test A (BP/EP) |
Freezing Point-NLT 53°C |
58 deg C |
|
|
Identification Test B (BP/EP) |
acid value is 195-210 |
206 |
|
|
Identification Test C (BP/EP) |
Examine the chromogram obtained in the ASSAY of Stearic acid and Palmitic Acid |
Complies |
|
|
Identification Test D (BP/EP) |
Gives reaction of Sodium |
Complies |
|
|
Identification Test A (USP) |
When heated, it fuses. At a high temperature it decomposes, emitting flammable vapors and the odor of burning fat,finally leaving a residue that, when moistened with water, is alkaline to litmus paper, effervesces with acids, and colors anonluminous flame intensely yellow. |
Complies |
|
|
Identification Test B (USP) |
Solidification temperature of the fatty acids is not less than 54 |
Complies |
Magnesium Stearate-ip/bp/usp/ep/jp
Approx. Rs 90 / KgGet Latest Price
Product Details:| Brand | MLA Group of Industries |
| Form | Powder |
| Packaging Size | 25 Kg |
| Application | Pharmaceutical |
|
Test and Method |
Specification |
|
|
Identification Method |
|
|
|
Identification Test A- (BP,IP,EP) |
Freezing Point-53°C Min |
|
|
Identification Test B- (BP,IP,EP) |
Fatty acid value is 195-210 |
|
|
Identification Test C(BP/EP) |
Retention time of the principal peaks in the chromatogram obtained with the test solution are approximately the same as those of the principal peaks in the chromatogram obtained with the reference solution |
|
|
Identification Test A-(USP) |
This solution responds to the test for Magnesium<191> |
|
|
Identification Test B- (USP) |
The retention times of the peaks corresponding to stearic acid and palmitic acid in the chromatogram of the Test solutioncorrespond to those in the chromatogram of the System suitability solution, as obtained in the Relative content of stearic acidand palmitic acid test. |
|
|
Identification Test D (EP/IP) |
1 ml of solution S gives the reaction of Magnesium |
|
|
Identification Test A-(JP) |
the sample solution responds to the Qualitative Tests for magnesium(2.3.1) |
|
|
Identification Test B- (JP) |
The retention times of the peaks corresponding to stearic acid and palmitic acid in the chromatogram of thei sample solution correspond to those in the chromatogram of the system suitability solution, as obtained in the Relative content of stearic acid and palmitic acid under the Purity. |
|
Acidity/Alkalinity(USP,BP,EP,IP,JP) |
NMT 0.05 mL of 0.1 N hydrochloric acid or 0.1 N sodium hydroxide is required to change the color of the indicator. |
|
|
|
Light Kaolin I P B P
Approx. Rs 22 / KgGet Latest Price
Product Details:| Grade | Pharma |
| Packaging Size | 25 Kg |
| Color | White |
| Brand | MLA Group of Industries |
| Country of Origin | Made in India |
|
Test and Method |
Specification |
|
Identification Test A(BP) |
A gelatinous precipitate is formed |
|
Identification Test B (BP) |
Gives reaction of silicate |
|
Identification Test C (BP) |
The resulting mixture does not flow |
|
Identification Test A(JP) |
The colour of the residue is gray. |
|
Identification Test B(JP) |
The filtrate obtained in (1) responds to the Qualitative Tests (1), (2) and (4) for aluminium salt. |
|
Acidity or Alkalinity(JP) |
pH of the filtrate is between 4.0 and 7.5 |
|
Coarse Particles(BP/IP) |
NMT 25 mg residue per 5 g sample |
|
Arsenic(BP/IP) |
2 ppm max |
|
Chloride(BP/IP) |
330 ppm max |
|
LOD@105°C(BP/IP) |
1.50% |
|
Loss on ignition (600*C)(BP/IP/JP) |
15% max |
|
soluble matter(BP) |
NMT 10 mgm residue per 2 gm sample |
|
Heavy Metals(IP) |
Max 20 ppm |
|
Iron(JP) |
NMT 500 ppm |
|
Plasticity(JP) |
The resultant mass has no remarkable fluidity. |
|
Heavy metal as pb(JP) |
NMT 50 ppm |
Bentonite BP/USP
Product Details:
| Brand | MLA Group of Industries |
| Packaging Size | 25 Kg |
| Grade | Pharma |
| Application | Pharma |
Test and Method | Specification |
Identification Test A (JP) | Add 0.5g of Bentonite to 3 mL of diluted sulfuric acid (1 in 3), and heat until white fumes are evolved. Cool, add 20 mL of water, and-filter. To 5 mL of the filtrate add 3 mL of ammonia TS: a-white, gelatinous precipitate is produced, which turns red on the addition of 5 drops of alizarin red S TS. |
Identification Test A (USP) | Add 2 g in small portions to 100 mL of water, with intense agitation. Allow to stand for 12 hours to ensure complete hydration. Place 2 mL of the mixture so obtained on a suitable glass slide, and allow to air-dry at room temperature to produce an oriented film. Place the slide in a vacuum desiccator over a free surface of ethylene glycol. Evacuate the desiccator, and close the stopcock so that the ethylene glycol saturates the desiccator chamber. Allow to stand for 12 hours. Record the X-ray diffraction pattern and calculate the d values: the largest peak corresponds to a d value between 15.0 and 17.2 angstrom units. Prepare a random powder specimen of Bentonite, record the X-ray diffraction pattern, and determine the d values in the region between 1.48 and 1.54 angstrom units: the peak is between 1.492 and 1.504 angstrom units. |
Identification Test B (JP) | Wash the residue obtained in (1) with water, add 2 mL of a solution of methylene blue trihydrate (1 in 10,000), and wash again with water: the residue is blue in color |
Identification Test B (USP) | Record the X-ray diffraction pattern (see X-ray Diffraction 941 ), and calculate the d values: the largest peak corresponds to a d value between 15.0 and 17.2 angstrom units. Prepare a random powder specimen of Bentonite, record the X-ray. diffraction pattern, and determine the d values in the region between 1.48 and 1.54 angstrom units: the peak is between 1.492 and 1.504 angstrom units. |
pH(JP) | 9 - 10.5 |
pH(USP) | 9.5 - 10.5 |
Heavy Metal(JP) | NMT 50 ppm |
Arsenic(JP) | NMT 2 ppm |
Arsenic(USP) | NMT 5 ppm |
Foreign Matter(JP) | No grit is felt when the fingers are rubbed over the wire mesh of the sieve. |
Loss on Drying(JP) | 5.0 - 10.0 % (2 g, 105°C, 2 hours) |
Loss on Drying(USP) | Dry it at 105 for 2 hours: it loses between 5.0% and 8.0% of its weight |
Explore More Products
M/s M.L.A Industries
Kanpur - 208012, Kanpur Nagar, Uttar Pradesh, India
© M/s M.L.A Industries. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited